Answers are grounded in this paper and cite their sources.
To achieve an omnidirectional circularly-polarized antenna mountable on metal platforms such as vehicle and aircraft is challenging work. In this paper, an omnidirectional circularly-polarized antenna is proposed. Specifically, a thin and compact open cavity loaded with a capacitive impedance surface is used to provide the horizontally-polarized electrical-field component. While the vertically-polarized electrical-field component is achieved by a thin open cavity placed above the metal ground with a small gap. Connecting the two radiating cavities with a metal plate, the omnidirectional circularly-polarized antenna can be constructed using one simple feed. Outstanding azimuth gain variation of less than 1 dB and axial ratio less than 3 dB are obtained for the proposed antenna. Owing to the proposed antenna has omnidirectional characteristics, it can be applied to a wide-angle scanning array. The proposed array consists of 1 × 16 omnidirectional circularly-polarized antennas mounted on a metal planform with half-wavelength spacing. The antenna array beam scanning is divided into broadside and endfire modes, achieving wide-angle scanning in the azimuth plane. For validation, a 1 × 16 array prototype is fabricated and experimentally tested. The measured results are consistent with the simulated results. The measured results show that the antenna can achieve good circularly-polarized radiation, with most of the axial ratio less than 3 dB at the main beam direction of the array. With the advantages of omnidirectional circularly-polarized and wide-angle scanning, the proposed antenna can be used in communications between high altitude and ground.
No takes yet. Share an insight, caveat, or question.
Guan et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: