Answers are grounded in this paper and cite their sources.
Plastic has many advantages as a material for products.However, it can have negative impacts on the environment due to its non-degradable nature.Therefore, there is a need for alternatives to address this issue, such as the production of bioplastics.In this study, bioplastics were produced from arrowroot starch and glycerol with the addition of ZnO through a mixing process at 700 rpm and heating at a temperature of 80°C for 60 minutes.The aim of this research was to investigate the production of bioplastics using the melt intercalation method and to determine the effect of adding ZnO and glycerol on the quality of the bioplastics.The independent variables in this research were the composition of glycerol and ZnO, with combination of variation including 0g ZnO:20%, 30%, 40%glycerol, 2g ZnO:20%, 30%, 40% glycerol, 3g ZnO:20%, 30%, 40% glycerol, and 4g ZnO:20%, 30%, 40% glycerol, while the mass of arrowroot starch used remained constant at 5 grams.The results of the bioplastic quality test analysis showed the optimal composition of materials in the sample with the addition of 3g of ZnO and 20% glycerol, where the obtained tensile strength was 7.848 MPa, elongation value was 13.285%, swelling value was 31.8182%, and degradation ability was observed for 20 days.
No takes yet. Share an insight, caveat, or question.
Latifa et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: