Answers are grounded in this paper and cite their sources.
The research paper endeavored to significantly improve the energy efficiency and sustainability of the electrode wear rate (EWR) in electric discharge machining (EDM) through a particular exploration of various parameters. These parameters included nano-powder concentration, electric current, and pulse-on time. By systematically analyzing and manipulating these variables, the study aimed to optimize the EDM process, thereby reducing energy consumption and enhancing the overall sustainability of the machining operation. We employed the Powder Mixed Electro-Discharge Machining (PMEDM) technique, a refined iteration of electric discharge machining. This innovative method blended graphite nano-powder with transformer oil to serve as the dielectric medium. The primary objective of this investigation is to examine the outcomes concerning crucial process parameters such as graphite powder concentration, electric current, and pulse-on time when machining high-speed steel, focusing mainly on electrode wear rate (EWR). Incorporating nano graphite (Gr) mixed powders into dielectric liquids has demonstrated a discernible enhancement in EWR across diverse operational conditions. The study found that the electrode wear rate (EWR) varied based on nano-powder concentration, electric current, and pulse-on time. Maximum EWR was observed at a concentration of 10 g/L, a current of 30 A, and a pulse-on time of 70 µs, while minimum EWR occurred at 0 g/L, 10 A, and 60 µs. The Full Factorial design, executed with MINITAB 17 software, validated these findings. The optimal EWR recorded was 1.154 mm3/min. The coefficient of determination (R-sq) for surface roughness prediction also stood at 91.15%.
No takes yet. Share an insight, caveat, or question.
Asaad A. ABBAS (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: