Answers are grounded in this paper and cite their sources.
This article experimentally demonstrates the generation of mode-locked (ML) pulses, which can operate either at 1568 nm or 1608 nm in an Erbium/Ytterbium co-doped fiber laser cavity (EYDF). The wavelength switching was achieved by adjusting the cavity loss. Depending on the cavity length and losses, the laser could operate in either mode-locked (ML) or Q-switched (QS) regimes. We explored the characteristics of the QS and ML pulses, based on the pump power, cavity length and loss. The laser produced stable QS pulses with a repetition rate of 22.73 kHz and a width of 12.2 μs at a pump power of 3.1 W at 1608 nm, for a 30 m long cavity. The laser produced 520 ns ML pulses at 1568 nm with a repetition rate of 877 kHz, average output power of 2.15 mW, and energy of 2.45 nJ with an additional single-mode fiber (SMF) length 200 m at the same pump power. The laser could switch to 1608 nm wavelength when the cavity losses were adjusted.
No takes yet. Share an insight, caveat, or question.
Varsha et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: