This is the authors' abstract. We don't add key points for this paper.
The effect of nickel as a minority alloying element (1--3) at.% on the structure and mechanical properties of amorphous and ultrafine crystalline Al75Cu15Mg9Ni, Al75Cu15Mg8Ni2 and Al73Cu15Mg9Ni3 alloys was investigated. Rapidly solidified ribbons of the three alloys were produced by chill block melt spinning (CBMS) method. It was proven that the rapid solidification produced amorphous structure in all alloys. Detailed HRTEM observations revealed zones of chemical inhomogeneity in the X-ray amorphous matrix which were identified as zones containing clusters of different atoms. A part of the ribbons was annealed until complete crystallization. The indentation hardness HIT and indentation modulus EIT of the amorphous and ultrafine crystalline Al-Cu-Mg-Ni alloys were investigated and compared using nanoindentation tests. The obtained results showed an increase of HIT and EIT with increasing Ni content in both amorphous and ultrafine crystalline samples. All ultrafine crystalline samples had higher HIT and EIT than the amorphous ones.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Dyakova et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: