Answers are grounded in this paper and cite their sources.
The optimal functioning of power units, including their service life, correlates with their operating conditions. This is of particular importance in the conditions of the sharply continental climate inherent in the Angara region, where the research was carried out. The processes of diesel wear during warm-up are relevant. The object of the study was the diesel model D-240. Cycles of starting and warming up the engine at +20°C, +10°C and 0°C were considered. At each temperature condition, 20 starts were carried out. To assess wear, photocolorimetric analysis of the iron content of engine oil was used. Oil was taken from the engine crankcase, both before and after starts. The assessment of wear of power unit parts was carried out by measuring when the engine warmed up at idle speed of the crankshaft, as well as under rated load. Assessment of iron content in oil when operating a diesel engine with a coolant temperature of 80°C, with a rated load at an ambient temperature of +20°C to -30°C. During the experiments, it was found that the wear of parts of the D-240 piston internal combustion engine in the Angara region during the start-up and warm-up cycles at idle is identical to an average of 36.5% of the total operational wear; during startup and subsequent warming up of the diesel engine under rated load, wear corresponded to 13.8%. Warming up at idle causes higher wear of parts compared to warming up under load. The data obtained are valuable for optimizing the operating conditions of diesel power units in regions with a sharp continental climate.
No takes yet. Share an insight, caveat, or question.
Shukhanov et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: