Enhanced mineralization of bisphenol A by electric arc furnace slag: Fenton-like oxidation

Bisphenol A (BPA) aqueous solution was treated through a heterogeneous Fenton-like oxidation process with electric arc furnace slag (EAFS), a waste product from an Argentinian steel processing plant, as the catalyst. SEM/EDS, XRD, and Mössbauer spectroscopy characterization revealed a significant presence of Fe and minor amounts of Cu and Mn in EAFS, known to play active roles in the Fenton-like reactions. The predominant crystalline form of iron in EAFS was magnesiowüstite, accompanied by minor amounts of hematite, magnetite, maghemite, and metallic iron. Batch Fenton-like oxidation experiments were conducted under acidic conditions (pH 2.8–3), examining the effect of temperature (25, 50, and 70 °C) and catalyst load (0.1, 0.5, and 1 g/L) on BPA degradation and mineralization over 180 min. BPA was completely degraded within the first minutes, while mineralization levels improved from 40% to an outstanding 70% as the temperature increased from 25 to 70 °C. The catalyst gradually lost its activity after five cycles at 25 °C, but raising the temperature up to 70 °C allowed maintaining mineralization levels between 70 and 50% over ten cycles. The oxidation process involved a combined Fenton-like homogeneous/heterogeneous mechanism, and deactivation was linked to a lower leaching of active cations over the cycles, reduction of the Fe(II)/Fe(III) ratio in the iron phases, and blocking of active sites by adsorption of reaction intermediates. EAFS demonstrated an exceptional performance in the Fenton-like oxidation of BPA. The utilization of this type of industrial waste materials represents a promising technological alternative that could benefit both steel processing and water treatment plants.