Answers are grounded in this paper and cite their sources.
Temperature distribution at combustor outlet is pivotal for lifetime and operational reliability of a turbine, wherein dilution hole diameter emerges as a significant design parameter influencing it. In the present work, numerical simulations of five schemes of a single-sector centrally staged combustor with different dilution hole diameters are conducted. The influence of dilution hole diameters ranging from 8 to 16 mm onflow characteristics inside combustors is explored, while the morphology and development of both high-temperature region and flame, as well as the formation process of hot streaks at outlet are analyzed. The results indicate that, with a constant inlet mass flow rate, the dilution hole diameter affects jet penetration depth and axial length of the primary recirculation zone (PRZ). As dilution hole diameter increases, equivalence ratio in the main combustion zone gradually approaches or even exceeds the stoichiometric ratio, resulting in a transition from lean to rich fuel therein, and an expansion of the high-temperature region. Under smaller dilution hole size, two obvious flame fronts form at the PRZ and the interface between the dilution hole jet and the shear layer. As the hole diameter increases to 16 mm, flame fronts are separated by the shear, leading to a reduction of obvious flame fronts to a single location in the PRZ after separation. As hole diameter increases from 8 to 16 mm, total pressure loss decreases from 3.5% to 2.6%, and combustion efficiency drops from 99.97% to 99.79%. Both pattern factor and radial pattern factor initially rise and subsequently reduce. The combustor exhibits optimal performance when dilution hole diameter is 14 mm.
No takes yet. Share an insight, caveat, or question.
Pang et al. (2024) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: