Answers are grounded in this paper and cite their sources.
This study was done to verify correlation between the degree of deterioration caused by accelerated weathering apparatus and by outdoor exposure. In this study, especially using metal halide lamp type accelerated weathering apparatus (MHL), examination was conducted on the mechanism of deterioration caused by MHL irradiation. Xenon arc lamp type accelerated weathering apparatus (XAL) was also used because the photo spectra of it is similar to that of sunlight, suggesting that the degree of deterioration by outdoor exposure could be predicted. Polypropylene (PP) molding test piece was irradiated by accelerated weathering apparatus and exposed outdoors. After outdoor irradiation or exposure, color difference and tensile strength were measured, carbonyl index was calculated and the surface of test piece was observed. These results in the case of irradiation by accelerated weathering apparatus compared with the case of outdoor exposure for 1 year. In the case of irradiation by MHL, estimated irradiation time equivalent to outdoor exposure for 1 year from measured value of color difference and carbonyl index were shorter than the time calculated from ultraviolet irradiance. Tensile strength was not decreased to the degree equivalent to outdoor exposure for 1 year. It was estimated that irradiation by MHL accelerates change in the molecular structure on the surface, but a deteriorated area remains near the surface. Outdoor exposure causes deterioration deeper than irradiation by MHL. Deterioration of PP is caused by ultraviolet irradiance, moisture, difference in cold and warm temperatures, and irradiance of light that has longer wavelength than ultraviolet.
No takes yet. Share an insight, caveat, or question.
Ogata et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: