Answers are grounded in this paper and cite their sources.
A family of Al x Cu y CrFeMnNi (x=0, 0.15, 0.3, 0.6, 0.9 and y=0, 0.07, 0.14) high entropy alloys (HEA) were arc cast and then heat treated for 24h at 1100֯C-1150֯C followed by water quench. The microstructure of low Al alloys (Al 0 Cu x and Al 0.15 Cu x ) consisted of FCC and BCC phases. Al 0.3 Cu x showed an additional ordered precipitate phase. High Al alloys (Al 0.6 Cu x and Al 0.9 Cu x ) consisted of two BCC phases rich in Cr-Fe and Ni-Al. In the present study, the phases formed in the microstructures were evaluated in light of valence electron concentration (VEC), Hume-Rothery (H-R) and degree of partitioning. Although VEC successfully predicts the impact of Al and Cu on the trend of FCC-BCC phase formation, the parameter does not accurately predict the structure of high Al alloys. A good agreement was observed between H-R rules prediction and the experiments which might be ascribed to the high temperature equilibrium phases developed by the heat treatment. As per these criteria, increasing Cu (up to 3at.%) and decreasing Al promote formation of solid solution phases. Adding minor amounts of Cu avoids the Cu partitioning that besets high Cu HEAs.
No takes yet. Share an insight, caveat, or question.
Navazani et al. (2024) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: