Answers are grounded in this paper and cite their sources.
In a previous study, the author proposed a new RAO-based Translation Process (RTP) method for simple estimation of extreme value distribution (EVD) of narrowband nonlinear responses, and the method can estimate the EVD of wave-induced hull girder sectional forces (including body nonlinearity) with sufficient accuracy. This paper confirms the applicability of the RTP method to a nonlinear roll motion of ships with nonlinear damping. The RTP method transforms a linear response into a nonlinear response based on the wave height-dependent RAO, and it is important to determine (A) what is considered as a linear response and (B) how to determine the correspondence between a linear and a nonlinear response. Regarding the former (A), if the response at small wave height is regarded as a linear response as in the case of wave loads, the linear response may be overestimated because there can be cases where the linear damping force is close to zero. Therefore, in this paper, the equivalent linearized response of the roll motion in irregular waves is considered as the linear response. For the latter (B), the linear-nonlinear relationship was determined based on the peaks of wave height-dependent RAO in the previous study, but it was found that applying this to the roll motion overestimates the nonlinear effect too strongly. Therefore, the author newly proposes a method to determine the linear-nonlinear relationship based on the standard deviation of the wave height-dependent response spectrum. This method was confirmed to be in good agreement with the time domain simulation results for both high and low damping cases, and for both blunt and sharp exciting moment spectrum cases.
No takes yet. Share an insight, caveat, or question.
Sadaoki Matsui (2024) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: