Answers are grounded in this paper and cite their sources.
The purpose work is to clarify data on temperature changes on horizon air tuyeres of the blast furnaces. Shown that the common idea about similarity of changes in temperature and pressure of gases needs to be clarified. The difference is that the temperature gases in the direction to the centre of the furnace increases to the focus of combustion in front of the tuyeres, and pressure increases to the end of the tuyeres cavity. Accordingly, the temperature decreases starting from combustion focus, and pressure — starting from coke shell of tail part of the tuyeres cavity. The calculation gas temperature variation coefficients Vt based on the DonNDIchormet measurement data showed that Vt decreased from 8 to 3.5 % on average over a distance of 0.5 m as the distance from the tip of the tuyeres increased. This indicates that during peripheral operation of the furnaces, the zone in front of the tuyeres is the most critical in terms of temperature fluctuations. This phenomenon is explained by the characteristic features of the gas mechanics of the tuyere cavity — reduced gas pressure at the tuyere section and discrete deformation of the air-gas jet by coke collapse through dynamically unstable vaults of the tuyere cavity. It is shown that the blast furnace melting conditions determine the effectiveness and efficiency of the blast furnace process, as well as the possible level of reaching the theoretical combustion temperature.
No takes yet. Share an insight, caveat, or question.
Kryachko et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: