Answers are grounded in this paper and cite their sources.
The corrosion behavior of WE43 alloy with different rolling reductions (0%, 25%, 45%, and 80%) at 500 °C was investigated in 3.5 wt.% NaCl solution. The microstructure evolution of the rolled WE43 alloy was characterized in detail by means of optical microscopy (OM), transmission electron microscopy (TEM) and electron back-scattered diffraction (EBSD). The results show that with increasing reductions, basal texture is gradually enhanced and grain size gradually decreases. Only the alloy with 45% reduction exhibits dispersed dynamic precipitates. Immersion and electrochemical measurements demonstrate the decreasing order of the corrosion resistance of the rolled WE43 alloy: 45% reduction > 80% reduction > 25% reduction > 0 reduction. The best corrosion resistance of the WE43 alloy with 45% reduction is mainly related to a large number of finely dispersed precipitates, which are capable of promoting the formation of a compact corrosion product layer. The increased corrosion rate of the sample with 80% reduction is induced by the re-solution of the majority of precipitates into the matrix. The grain size, basal texture and deformation twins have a limited effect on the corrosion resistance of rolled WE43 alloy compared with the precipitates.
No takes yet. Share an insight, caveat, or question.
Cai et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: