Aeroacoustic Computations of a Transonic Truss-Braced Wing Aircraft: Part 1 – Aerodynamic and Airframe Noise Simulations

Computational results are presented for an 8%-scale, full-span, transonic truss-braced wing (TTBW) model simulated as installed in the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel and in free-air conditions. The simulations were conducted with the lattice Boltzmann solver PowerFLOW® to capture the time-accurate characteristics of the flow. The aerodynamic behavior of the aircraft was investigated in the landing configuration, with high-lift devices and landing gear deployed, as well as in the clean (cruise) configuration, with these components stowed. Analyses were performed on local flow quantities, global forces, and time-averaged surface pressures. Aerodynamic quantities were shown to be sensitive to mesh resolution levels, driven by small geometric features inherent to the TTBW model. Flow features of the TTBW model were examined, with the wing/strut configuration of this model presenting unique behaviors generally not found in conventional transport aircraft. Near-field, time-dependent flow quantities obtained from the scale-resolving simulations were used in conjunction with a Ffowcs-Williams and Hawkings integral approach to predict the far-field airframe noise signature of this advanced concept. The effects of permeable data surface end caps on the far-field noise spectrum in the flyover direction were determined to be negligible.