Answers are grounded in this paper and cite their sources.
Double-wall cooling has been extensively investigated due to its exceptional cooling performance. However, most previous studies on the cooling characteristics of double-wall geometry have been conducted under non-reacting conditions, neglecting the influence of high-temperature flue gas radiation. In this paper, an experiment investigation was carried out to evaluate the impact of blowing ratio M and coolant-to-gas temperature ratio on the cooling characteristics of effusion/impingement cooling at reacting flow conditions. The experiments were performed at atmospheric pressure with flame temperatures of 1,800 and 1,900 K respectively. Flue gas temperature was measured by S-type thermocouples, while an infrared camera and N-type thermocouples were employed for the gas-side wall surface temperature distribution measurements. The results demonstrate that the laterally averaged cooling effectiveness of the effusion/impingement cooling system increases with the increase of M. However, beyond a blowing ratio of 5.1, further increments in M do not significantly affect the cooling effectiveness. Moreover, it is observed that the laterally averaged cooling effectiveness gradually improves along the flow direction but at a reduced rate. Additionally, no significant changes in cooling effectiveness are observed after X/D > 50. Furthermore, when considering a blowing ratio of 4, higher coolant temperatures result in higher cooling effectiveness compared to lower coolant temperatures.
No takes yet. Share an insight, caveat, or question.
Yi et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: