Answers are grounded in this paper and cite their sources.
Polystyrene nanospheres (PS spheres) were prepared by soap-less emulsion polymerization. The polymerization reaction with the monomer styrene was initiated using potassium persulfate under nitrogen injection. By adjusting the amount of precursor and the mixing speed of the stirrer during the polymerization process, PS particles of the expected appropriate size can be obtained. This work focuses on the effect of precursor concentration, reaction conditions and stirrer speed on particle size. Samples (C1–C6) were systematically prepared with varying amounts of K 2 S 2 O 8 and C 8 H 8 . The particle sizes ranged from 69.9[Formula: see text]nm to 364.44[Formula: see text]nm. The calculated K 2 S 2 O 8 to C 8 H 8 ratio remained approximately constant across the samples. This supports the observed trend where increasing monomer concentration leads to larger particle sizes, indicative of bonded spheres. In addition, a correlation between stirring speed and PS bead size is found, with higher speeds resulting in smaller particles. Transmittance analysis of the filtered and sieved process samples showed that better polymerization conditions could be selected for PS beads up to 220[Formula: see text]nm at a stirring speed of 900[Formula: see text]rpm.
No takes yet. Share an insight, caveat, or question.
Yeh et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: