A Mitigating Strategy for Urban Heat Islands: The Biomimicry Approach Case of Delhi

first_page Download PDF settings Order Article Reprints Font Type: Arial Georgia Verdana Font Size: Aa Aa Aa Line Spacing:    Column Width:    Background: Open AccessAbstract A Mitigating Strategy for Urban Heat Islands: The Biomimicry Approach Case of Delhi † by Anushka DhankharAnushka Dhankhar SciProfiles Scilit Preprints.org Google Scholar , Anway KunduAnway Kundu SciProfiles Scilit Preprints.org Google Scholar , Neha BasumataryNeha Basumatary SciProfiles Scilit Preprints.org Google Scholar , Sanika KhuneSanika Khune SciProfiles Scilit Preprints.org Google Scholar and Amit Kumar JaglanAmit Kumar Jaglan SciProfiles Scilit Preprints.org Google Scholar * Department of Architecture, School of Planning & Architecture, New Delhi 110002, India * Author to whom correspondence should be addressed. † Presented at the 1st International Online Conference on Biomimetics (IOCB 2024), 15–17 May 2024; Available online: https://sciforum.net/event/IOCB2024. Proceedings 2024, 107(1), 5; https://doi.org/10.3390/proceedings2024107005 Published: 28 May 2024 Download keyboard_arrow_down Download PDF Download PDF with Cover Download XML Download Epub Download Supplementary Material Versions Notes Keywords: biomimicry; urban heat island; albedo; materials; building skin The need for widespread urbanisation has increased due to population growth. Because of this, there is now a phenomena called urban heat islands (UHIs), which form when there are greater air levels or surface temperatures in urban areas than in rural areas. The local climate, the urban fabric, the materials used, and the surfaces all contribute to UHIs. Architects found that with every 0.6 °C increase in midsummer temperature, peak hour power demand climbs 1.5 to 2% in Delhi. It has been projected that for every degree over a (locally specified) cut-off point, mortality rates for populations inside the European Union increase by 1 to 4%. However, in the middle of the hot buildings and humid streets, nature provides us with a multitude of clever cooling strategies that we might imitate. A creative approach to problem solving, bioinspiration, also called biomimicry, draws inspiration from nature to develop and innovate across a range of industries. It offers pleasing aesthetics in addition to useful solutions. A few of the bioinspired techniques include using materials with high reflectance, i.e., those which are similar to the skin of Saharan ants; imitating the colour and reflectance variations of zebra skin for differential heating; and adding water features and vegetation that are modelled after human skin's evapotranspiration. Quite a few architectural components use these biomimetic concepts. Sun protection is actively provided by kinetic facades. Albedo is increased by the use of materials with high reflectivity. Differential heating caused by the incorporation of materials with varying degrees of reflectance creates convection currents. A localised cooling effect is achieved by the interspersion of green walls, water features, and porous materials that retain water. The goal of this study is to develop sustainable urban environments with lower UHI impacts using biomimetic concepts, such as green infrastructure and bioinspired materials. Supplementary MaterialsThe following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/proceedings2024107005/s1.