Answers are grounded in this paper and cite their sources.
The small strain shear modulus (Gmax) of soil is an important geotechnical parameter for the design of support structures for offshore wind foundations, such as monopiles. In-situ measurement of shear wave velocity (Vs) is preferred for deriving Gmax, however it is not standard to perform such measurements at each WTG location for a large offshore wind farm and correlation between CPT response and Vs/Gmax is therefore needed to provide Gmax profiles for all locations. This paper presents the use of seismic cone penetration tests (SCPTs) to measure in-situ Vs and develop site-specific CPT-based correlations to estimate Vs, and hence Gmax. Using example SCPT data from two offshore wind farms, this paper demonstrates the procedures from processing SCPT data to develop site-specific and unit-specific Vs correlations. In order to achieve good fitting between the Vs correlations and the measured data, detailed procedures are recommended for correlation calibration: 1) calculate representative CPT values (qc, fs, u2) that coincide within-situ Vs measurements; 2) differentiate soil types with different soil properties; 3) select and filter data for the correlation study; 4) perform regression analyses to find best-fit coefficients for Vs correlations; 5) evaluate the weight of different impact factors on Vs. Such procedures are recommended to estimate Vs values and reduce deviation between measured and calculated values.
No takes yet. Share an insight, caveat, or question.
Teng et al. (2024) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: