Answers are grounded in this paper and cite their sources.
Steel is the primary shipbuilding material; however, it erodes quickly. Adequate protection requires hard, durable, and adhesive coatings. This study examines how aluminium-graphite pigment and heat treatment affect epoxy-coated SS400 steel plate corrosion, adhesion, and coating resilience. This study used a 1:1 and 3:1 pigment ratio with 100°C and 150°C heat treatment. The coating layer was 250 μm thick and comprised 80% epoxy and 20% aluminum-graphite. The maximum adhesion strength, 19.62 MPa, was achieved with an aluminium-graphite pigment ratio of 1:1 and 100°C heat treatment. The top coating resistance was 6.86 Joules under identical conditions. The lowest corrosion rate, 0.047 mmpy, was at a 3:1 aluminum-graphite ratio and 150°C heat treatment. This discovery has significant consequences for shipbuilding steel corrosion resistance.
No takes yet. Share an insight, caveat, or question.
Budiarto et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: