Boundary-layer instability on a highly swept fin on a cone at Mach 6

The growth and characteristics of linear, oblique instabilities on a highly swept fin on a straight cone in Mach 6 flow are examined. Large streamwise pressure gradients cause doubly inflected cross-flow profiles and reversed flow near the wall, which necessitates using the harmonic linearized Navier–Stokes equations. The cross-flow instability is responsible for the most-amplified disturbances, however, not all disturbances show typical cross-flow characteristics. Distinct differences in perturbation structure are shown between small ( ~ 3–5 mm) and large ( ~ 10 mm) wavelength disturbances at the unit Reynolds number Re' = 11 × 10⁶ m ⁻¹ . As a result, amplification measurements based solely on wall quantities bias a most-amplified disturbance assessment towards larger wavelengths and lower frequencies than would otherwise be determined by an off-wall total-energy approach. A spatial-amplification energy-budget analysis demonstrates (i) that wall-normal Reynolds-flux terms dictate the local growth rate, despite other terms having a locally larger magnitude and (ii) that the Reynolds-stress terms are responsible for large-wavelength disturbances propagating closer to the wall compared with small-wavelength disturbances. Additionally, the effect of free-stream unit Reynolds number and small yaw angles on the perturbation amplification and energy budget is considered. At a higher Reynolds number ( Re' = 22 × 10⁶ m ⁻¹ ), the most-amplified wavelength shrinks. Perturbations do not behave self-similarly in the thinner boundary layer, and the shift in most-amplified wavelength is due to decreased dissipation relative to the lower-Reynolds-number case. Small yaw angles produce a streamwise shift in the boundary layer and disturbance amplification. The yaw results quantify a potential uncertainty source in experiments and flight.