Transfiguring energy with an advantageous supercapacitor integrating MoS₂/carbon quantum dots bi‐composites into a high‐performance polypyrrole matrix for unprecedented efficiency

For the first time, a simple one‐step in situ chemical polymerization technique is used to create a novel molybdenum disulphide/sulphonated carbon quantum dots (CQDs) and polypyrrole (MCP) nanocomposite that is extended for successful use in charge storage supercapacitor (SC) device. By inheriting qualities of excellent electrical conductivity of MoS 2 , CQDs and improved pseudocapacitive activity of polypyrrole (PPy), the MCP nanocomposite provides a suitable SC electrode material. 0.6 MCP nanocomposited three‐electrode system demonstrates 93.21% retention after 5000 cycles, and a maximum specific capacity of 2253 F/g at 2 mV/s with higher side of energy density as 106.06 Wh/kg along with a considerable power density as 180.28 W/kg. Using MCP as anode and an AC or activated charcoal electrode as cathode, a solid‐state asymmetric supercapacitor (ASC) was constructed. The fabricated device supplies a greater value of specific capacitance as 154.09 F/g at 100 mV/s and 175 F/g at 0.1 A/g, also evidenced superior energy density data as 126 Wh/kg along with an appreciable power density of 604.8 W/kg. After charging the ASC for 2 min, the light emitting diode shone for 5 min. The findings underpin that MCP is a potential electrode material that could be utilized as a better alternative in futuristic supercapacitor devices.