A conjugate heat transfer investigation of outer-wall cooling performance in double-wall vane pressure side

Double wall cooling has significant potential for high-pressure turbine vane cooling technology. Geometric parameters of the double-wall vane play a crucial role in determining the cooling performance. This paper presents a double-wall cooling model with five outer wall thicknesses and three injection angles, using the curvature of the actual pressure side of the engine as a reference. The overall cooling effectiveness is investigated over the range of blowing ratio from 0.5 to 2.5. Results indicate that, at injection angles of 20° and 30°, an outer-wall thickness of 1.5Df maximizes the combined benefits of film cooling and thermal conductivity in solid domains. At an injection angle of 40°, the blowing ratio becomes a determining factor in selecting the optimal outer wall thickness. Additionally, a reasonable arrangement of pin fins promotes a more uniform outer wall temperature distribution. A thinner outer wall at higher blowing ratios provides optimum overall cooling effectiveness.