Answers are grounded in this paper and cite their sources.
Optimization of the injection moulding process parameters of thermoplastic composites made of high-density polyethylene (HDPE) and kaolin clay (KC) was carried out using the Taguchi method. The parameters that were taken into consideration were melting temperature, packing pressure and packing time. Composites containing 98 wt% of HDPE and 2wt% of KC with various particle sizes of <75, 75-106 and 106-150 µm were used. Two defects that are usually associated with the injection moulding process of polymers were selected, namely shrinkage and warpage. Results showed that the optimal parameters needed to obtain a minimum shrinkage value for composites containing clay (regardless of its particle size) are very similar to those for the pure HDPE. Contrary, the optimal parameters needed to obtain a minimum warpage value depends on the size of clay particles added, which were also different from those of the pure HDPE. Results also revealed that the most effective parameter (both shrinkage and warpage) for pure HDPE and its composites with clay was the melting temperature.
No takes yet. Share an insight, caveat, or question.
Treesh et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: