Key points are not available for this paper at this time.
This research investigates the performance of small concrete beams that are reinforced with glass fiber-reinforced polymer (GFRP) bars, basalt fiber-reinforced polymer (BFRP) bars, and traditional steel bars. It addresses the limitations of traditional steel reinforcement, emphasizing the need for alternative strategies. Fiber-reinforced polymer (FRP) materials, including GFRP and BFRP, are examined for their mechanical characteristics compared to steel. The experimental program focuses on ultimate load-bearing capacity, deflection, deformation at different load levels, and failure modes. The concrete specimens, prepared according to Eurocode, consist of six small concrete beams measuring 80 × 120 × 1100 mm with varied reinforcements. The study reveals that GFRP-reinforced beams outperform BFRP and steel reinforcements in ultimate load-bearing capacity, showcasing enhanced structural performance. The GFRP-reinforced beams exhibit capacity and resilience characteristics surpassing those of both BFRP and steel, whereas the deflection observed was higher on both fiber-reinforced beams than on the steel-reinforced beams. The examination of failure modes reveals that the concrete beams that were reinforced with FRP bars showed a bending property before failure, while those reinforced with steel broke easily without bending much. This comprehensive research contributes to advancing our understanding of FRP materials’ application in concrete structures, paving the way for further optimization and overcoming limitations in reinforcement materials.
Belay et al. (Tue,) studied this question.