Chemical compatibility between poly(ethylene) and cellulose nanofibers from kraft pulps containing varying amounts of lignin: An aqueous acetylation strategy and its effect on biocomposite properties

Previous efforts to acetylate fibers and cellulose nanofibers (CNFs) are methodologically demanding and usually based on organic solvents catalyzed by acids. Hence, the purpose of this study was to introduce an improved method to acetylate unbleached (2 % and 5 % lignin) and bleached fibers (<1% lignin), and the corresponding CNFs, using a one-pot strategy in an aqueous alkaline medium. The lignin content in the pulp fibers (5 %) influenced the morphology of the corresponding fibrillated materials, i.e., increased secondary fines (92 %) and mean fibril area (36 %). Additionally, the pulps and CNFs (0 % and 5 % lignin content) were acetylated and compounded with high-density poly(ethylene) (HDPE). Acetylation improved the mechanical strength from 19 MPa (HDPE) to 30–40 MPa (when including acetylated fibers or CNFs). Finally, acetylation revealed a positive effect on melt-flow-index and elongation at break, and the water absorption of injection molded specimens was reduced to roughly 0.6 % after 10 days of testing.