Answers are grounded in this paper and cite their sources.
Experimental assessment of Dyneema HB26 samples' protection capability under ballistic impact, revealing penetration dynamics.
<ns3:p>The paper presents a study of protection capabilities of Dyneema HB26 samples with mass area densities of 15 kg/m2 and 20 kg/m2 and dimensions of 600×800 mm subjected to firing with 20 mm FSP (Fragment Simulating Projectiles) fired with a 20×102 mm ballistic barrel, simulating the impact of a fragment according to STANAG 2920. The velocities of this projectile before impacting the sample and after piercing the sample (residual velocity) were estimated by recording the firing with the FASTCAM SA-Z 2100K high-speed camera. Complete or partial penetration of the samples was achieved, and the type of FSP deformation was shown depending on where the projectile hits the sample. The velocity of the projectile was calculated for each sample to determine the protection capability specified by the V50 parameter. The projectile impact velocity and deflection errors were deter-mined.</ns3:p>
No takes yet. Share an insight, caveat, or question.
Wiśniewski et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: