Answers are grounded in this paper and cite their sources.
The prevention of lignin repolymerization/condensation in lignocellulose pretreatment can enhance both the bioconversion of cellulose and the quality of the obtained lignin. 2-Naphthol is a very effective pretreatment additive for suppressing lignin repolymerization, which enables overcoming the extraordinarily high recalcitrance of softwood to bioconversion. In this work, new approaches for adding 2-naphthol to the steam explosion pretreatment of softwood were studied. It was found that spray impregnation of spruce wood chips with 2-naphthol dissolved in acetone or ethanol is equally effective as the usually used soak-impregnation. However, spray-impregnation allows for an eight-fold reduction in solvent consumption. 2-Naphthol impregnation enabled practically quantitative cellulose conversion to glucose using an enzyme dosage of 30 FPU (filter paper units) g–1 cellulose, which corresponds to a digestibility enhancement of 89.1% compared to the control without additive. It was further disclosed that spraying of water-suspended 2-naphthol onto wood chips enabled a high glucose yield of 81.9% using an enzyme dosage of 30 FPU g–1 cellulose, which corresponds to an enhancement of 54.8% compared to the control and omits the use of solvents. An economic evaluation showed that spraying dissolved or water-suspended 2-naphthol is more cost-effective than soak-impregnation or admixing 2-naphthol flakes/powder to the biomass.
No takes yet. Share an insight, caveat, or question.
Seidel et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: