Answers are grounded in this paper and cite their sources.
Recent developments in hydrocarbon-based proton exchange membrane fuel cells have significantly narrowed the performance gap compared to state-of-the-art cells using perfluorosulfonic acid ionomers (PFSA). However, balancing protonic resistance and gas transport resistance in the catalyst layer remains a challenge at low humidity. This study investigates gas transport resistance and its components in sulfonated phenylated polyphenylene-based catalyst layers using various limiting current methods. Results show that increasing the dry ionomer to carbon (I/C) ratio from 0.2 to 0.4, a measure to catch up with protonic resistance of PFSA-based catalyst layers, significantly increases gas transport resistance in the cathode catalyst layer by 28 %. The data suggest a strong correlation between local gas transport resistance and IEC. A high IEC is beneficial for the gas transport through the ionomer film. However, at low ionomer volume fractions the local gas transport resistance is dominated by the I/C independent interfacial resistance. Furthermore, a low IEC hydrocarbon ionomer, such as Pemion ® PP1-HNN4–00-X (IEC = 2.5 meq g −1 ), not only exhibits a beneficial interfacial resistance, but also suppresses excessive ionomer swelling, which typically occurs during operating conditions where liquid water is forming.
No takes yet. Share an insight, caveat, or question.
Liepold et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: