Answers are grounded in this paper and cite their sources.
BaCe0.8Fe0.1Ni0.1O3-δ (BCFN) in perovskite structure is impregnated consecutively by BCFN solution and BCFN suspension into a phase-inversion prepared NiO-Gd0.1Ce0.9O2-δ (GDC) scaffold as an anode of solid oxide fuel cells (SOFCs) with on-cell dry reforming of CH₄ (DRM). The whole pore surface of the scaffold is covered by small BCFN particles formed by BCFN solution impregnation; the large pores near the scaffold surface are filled by BCFN aerogels with a high specific surface area produced by BCFN suspension impregnation, acting as a catalytic layer for on-cell DRM. After reduction, the anode consists of a Ni-GDC scaffold and BCFN particles with exsolved FeNi₃ nanoparticles. Such BCFN-impregnated Ni-GDC anode has higher electrical conductivity, electrochemical activity, and resistance to carbon deposition, with which the cell shows maximum power densities between 1.44 and 0.92 W·cm⁻² using H₂ and from 1.09 to 0.50 W·cm⁻² with CO₂-CH₄ at temperatures ranging from 750 °C to 600 °C. A stable performance at 400·mA·cm⁻² and 700 °C is achieved using 45%CO₂-45%CH₄-10%N₂ for more than 400 h without carbon deposition, benefiting from the impregnated BCFN aerogel with high specific surface area and water adsorbability.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: