Key points are not available for this paper at this time.
Abstract The effects of sulfate salts under low and high salinity conditions and pH of 3.5–11 on interfacial tension (IFT) reduction and IL adsorption using resinous (RSO) and asphaltenic (8 wt/wt%) synthetic oils are investigated. The measurements showed the increasing effect of pH on the IFT of RSO/DW from 23.5 to 27.3 mN/m (pH = 3.5 → 7) in the first place and a reducing effect (0.4 mN/m) if pH = 7 → 11. Using a high concentration of 50,000 ppm for MgSO 4 , and Na 2 SO 4 revealed an extensive IFT reduction for a pH value of 11 with the value of 0.20 mN/m for Na 2 SO 4 . The measured IFT values showed the significant impact of IL (500 ppm) on the IFT (minimum value of 0.01 mN/m for RSO/50,000 Na 2 SO 4 + 500 ppm 1-decyl-3-methyl imidazolium triflate (C 10 mimTfO)) for pH = 11. The IL adsorption measurements showed the role of in-situ surfactant production (saponification process) on the 1-decyl-3-methyl imidazolium chloride (C 10 mimCl) and C 10 mimTfO adsorption reduction from 3.67 to 2.33 and 4.21 to 3.34 mg IL/g rock, respectively. The performed core flooding experiments using the optimum chemical formulation showed the possibility of tertiary oil recovery with maximum oil recovery of 28.8% based on original oil in place in the presence of 500 ppm.
Moradi et al. (Wed,) studied this question.