Exploring the Effect of Relaxation Time, Natural Surfactant, and Potential Determining Ions (Ca2+, Mg2+, and SO42−) on the Dynamic Interfacial Tension Behavior of Model Oil-Brine Systems

This study examined how the concentration of asphaltene and divalent ions in various salinities affects the interfacial tension (IFT) between a model oil/brine using the pendant drop method. The oleic phase consisted of a mixture of toluene and n-heptane (heptol), to which asphaltene was added to investigate how asphaltene molecules affect the surface properties. The base fluid was prepared with a salinity of 40,000 ppm, and two additional solutions with concentrations of 4000 ppm (low salinity) and 80,000 ppm (high salinity) were created. The results revealed that increasing the concentration of asphaltene within certain salinity ranges led to a decrease in IFT. The lowest IFT was observed at the 40,000 ppm salinity level, indicating that at this optimal salinity, the maximum asphaltene concentration migrated to the heptol/brine interface, reducing the IFT from 23 mN/m to 16 mN/m. Additionally, a 0.5 % wt of asphaltene demonstrated a significant concentration of micellization of natural surfactants, suggesting that the interface was nearly saturated with asphaltene. Consequently, concentrations higher than this value did not significantly alter the IFT. In the final part of the study, the impact of divalent ions was investigated, revealing that as the concentration of Ca