Influence of Shale Mineral Composition and Proppant Filling Patterns on Stress Sensitivity in Shale Reservoirs

Shale reservoirs typically exhibit high density, necessitating the use of horizontal wells and hydraulic fracturing techniques for efficient extraction. Proppants are commonly employed in hydraulic fracturing to prevent crack closure. However, limited research has been conducted on the impact of shale mineral composition and proppant filling patterns on shale stress sensitivity. In this study, shale cylindrical core samples from two different lithologies in Jimusaer, Xinjiang in China were selected. The mineral composition and microscopic structures were tested, and a self-designed stress sensitivity testing system was employed to conduct stress sensitivity tests on natural cores and fractured cores with different proppant filling patterns. The experimental results indicate that the stress sensitivity of natural shale porous cores is weaker, with a stress sensitivity coefficient below 0.03, significantly lower than that of fractured cores. The shale mineral composition has a significant impact on stress sensitivity, with the stress sensitivity of clayey argillaceous shale cores, characterized by higher clay mineral content, being higher than that of sandy argillaceous shale, characterized by higher quartz mineral content. This pattern is also applicable to fractured cores filled with proppants, but the difference gradually diminishes with increased proppant concentration. The choice of large particles and high-concentration proppant bedding can enhance crack conductivity. Within the experimental range, the crack conductivity of 20–40 mesh quartz sand is more than three times that of 70–120 mesh quartz sand. At an effective stress of 60 MPa, the conductivity of cores with a proppant concentration of 2 kg/m2 is 3.61 times that of cores with a proppant concentration of 0.3 kg/m2. Under different particle size combinations of proppant filling patterns, the crack conductivity at the crack front with large-particle proppants is 6.21 times that of mixed bedding. This study provides valuable insights for the hydraulic fracturing design of shale reservoirs and optimization of production system parameters in subsequent stages.