Experimental study to compare the strength of concrete with different amounts of polypropylene fibers at high temperatures

Abstract It is widely known that adding fibers to concrete improves the properties of concrete, which has a brittle behavior. Although concrete has high compressive strength but poor tensile strength, this has led researchers to offer a variety of ways to deal with this weakness. The use of fibers is one of the methods used to enhance concrete behavior. Fire is one of the most important cases in structures; if the temperature is high or its duration is long, it will cause serious damage to the structure. The present study is an experimental study in which different concrete samples with different amounts of polypropylene fibers and different cement content are exposed once at a normal temperature of 25 °C and again at high temperatures, including 250 °C and 500 °C. The effect of temperature on the compressive and tensile strengths of concrete containing 0.5%, 1.5%, and 2% polypropylene fibres and with cement contents of 200 kg/m 3 , 260 kg/m 3 , and 320 kg/m 3 . The compressive and tensile strength was evaluated at curing 28 days of strength. The results showed a severe strength loss for all concretes after exposure to 500 °C. The relative compressive strengths of concretes containing PP fibers were higher than those of concretes without PP fibers. The tensile strength of concrete was more sensitive to high temperatures than the compressive strength. Based on the test results, it can be concluded that adding 2% PP fibers can significantly promote the residual mechanical properties of concrete during heating. The compressive strength at 25 °C with 2% PP fibres decreases by 43% with cement contents of 200 kg/m 3 and 64% with cement contents of 260 kg/m 3 , and 37% with cement contents of 320 kg/m 3 , respectively. Also, the compressive strength at 500 °C with 2% PP fibres decreases by 61% with 200 kg/m 3 , 59% with 260 kg/m 3 , and 42% with cement contents of 320 kg/m 3 , respectively.