This is the authors' abstract. We don't add key points for this paper.
Lean-burn hydrogen internal combustion engines are a good option for future transportation solutions since they do not emit carbon-dioxide and unburned hydro-carbons, and the emissions of nitric-oxides (NOx) can be kept low. However, under lean-burn conditions the combustion duration increases, and the combustion stability decreases, leading to a reduced thermal efficiency. Turbulent jet ignition (TJI) can be used to extend the lean-burn limit, while decreasing the combustion duration and improving combustion stability. The objective of this paper is to investigate the feasibility of a passive pre-chamber TJI system on a heavy-duty hydrogen engine under lean-burn conditions using CFD modelling. The studied concept is mono-fuel, port-fuel injected, and spark ignited in the pre-chamber. The overall design of the pre-chamber is discussed and the effect of design parameters on the engine performance are studied. From this analysis, it was found that the volume of the pre-chamber and the area of the pre-chamber holes have major impact on the performance of the pre-chamber. Next, the difference between a regular spark-ignited combustion and a TJI system are investigated at a medium load point. The combustion duration is shortened significantly using a passive pre-chamber. However, the heat transfer loss through the walls increased significantly due to prolonged higher temperatures and higher turbulence near the combustion chamber walls. Finally, the air-fuel ratio is increased to study its effect on the heat transfer loss and NOx emissions.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Maas et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: