Answers are grounded in this paper and cite their sources.
This research aims to not only examine the effect of different mixtures of Ar and CO2 on microstructural features and corrosion behavior of double-pass FCAW of 316L SS but also compare these characteristics with gas tungsten arc welding (GTAW) and self-shielded FCAW. Different shielding gas mixtures, namely 100%Ar, 100%CO2, 82%Ar+18%CO2 were used to make the specimens. All specimens represent biphasic microstructures containing austenite (Ɣ) and delta-ferrite (δ-ferrite). Based on the potentiodynamic (PD) test results, the anti-corrosion protection performance of the welded region was enhanced when using GTAW compared to self-shielded FCAW. Additionally, the impedance value of the GTAW joint was higher than that of the FCAW-welded specimens. The ductility of welded joints was ranked as GTAW > CO2 +Ar shielded FCAW > self-shielded FCAW > CO2 shielded FCAW. The ranking of transverse tensile strength was as follows: CO2 shielded FCAW> self-shielded FCAW > CO2+ Ar shielded FCAW> GTAW.
No takes yet. Share an insight, caveat, or question.
Mofid et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: