Answers are grounded in this paper and cite their sources.
Modeling diffusion bonding temperature variations and stresses in nickel alloy rotors indicates thermal dynamics' significance.
The diffusion bonding procedure between two stages of a nickel alloy drum rotor surrounded by a double-wrapped heating coil are modeled by computing the time-dependent temperature field and stresses. The power deposition in the workpiece is modeled by numerically solving the low frequency Maxwell equations in the enclosure. With this information, the time variation of the temperature rise throughout the work-piece is computed, as heating proceeds to steady state. Since the electrical resistivity is temperature dependent, coupling of the electromagnetic and heat diffusion equations is performed. After a steady-state temperature profile is reached, the top and bottom of the rotor are pressurized and bonding begins. Temperature dependent stresses and deformation are computed during this period, which lasts a few minutes. After the joining cycle, heat treatment continues for a short period while stress is relieved. Next, power to the coil is turned off and the workpiece allowed to cool via radiative losses. Parametric studies are performed to investigate the influence of coil placement and pressure load on the temperature and stresses near the bond joint.
No takes yet. Share an insight, caveat, or question.
Saltiel et al. (1995) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: