Answers are grounded in this paper and cite their sources.
The study reveals strain-controlled fatigue behavior in a metal matrix composite, suggesting differences depending on strain levels.
A study was conducted to investigate the fatigue behavior of a cross-ply metal matrix composite subjected to fully-reversed, strain-controlled fatigue cycling at elevated temperature. The stress-strain response, maximum and minimum stresses, and modulus during cycling were analyzed to characterize the macro-mechanical behavior. When the applied maximum strain was greater than 0.55% there was no change in the macroscopic response during cycling before the specimen fractured. On the other hand, there were significant changes in the macroscopic response prior to the specimen fracture when the applied maximum strain was less than 0.55%. A fatigue life curve was developed and partitioned into three regions based on the observed trends in the macroscopic response. Also, on a strain range basis, the fatigue life of the specimens tested in this study were compared with a similar set of experiments conducted under the load-controlled mode. It was found that the fatigue lives for these two conditions were the same within the experimental scatter.
No takes yet. Share an insight, caveat, or question.
Sanders et al. (1995) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: