Key points are not available for this paper at this time.
The Santa Barbara Amorphous-15-guar gum-grafted-poly (acrylic acid)/cobalt ferrite (SBA-15-GG-g-PAA/CoFe2O4) mesoporous adsorbent was prepared by graft copolymerization of acrylic acid (AA) onto guar gum (GG) in the Santa Barbara Amorphous-15 (SBA-15) substrate presence, followed by incorporating CoFe2O4 magnetic nanoparticles (MNPs). Diverse analyses were conducted to identify the prepared mesoporous adsorbent's chemical and morphological properties, thermal resistance, magnetic characteristics, surface area, and porosity. Based on the magnetic hysteresis loops, the mesoporous adsorbent rendered ferromagnetic behavior. According to TGA, it has char yields of 72 wt% at 800 °C and superparamagnetic behavior (Ms of 3.22 emu.g−1). The crystalline structure and cubic phases of CoFe2O4 MNPs in the GG-g-PAA amorphous matrix were demonstrated by XRD. The CoFe2O4 MNP formation with partial aggregations onto smooth, nonporous, and regular surfaces of the GG was depicted by FESEM images. Also, the precisely-arranged hexagonal structure with cylindrical pores of SBA-15 was authenticated by FESEM images. Additionally, the SBA-15 substrate has increased the BET surface area of the prepared mesoporous adsorbent to 40.55 m2/g, which is higher than the composite without SBA-15 mesoporous silica. Several experimental setups were used to evaluate the effectiveness of adsorption, including pH of the medium (4–9), Adsorbent dosage (0.003–0.02 g), Interaction time (1–25 min), and Initial pollutant concentration (50–400 mg/L). Using 0.003 g of mesoporous adsorbent at 25 °C, chlorpyrifos (CPF) and malachite green (MG) had maximum adsorption capacities (Qmax) of 909.1 mg/g and 1000.0 mg/g, respectively. In this study, the Langmuir isotherm model fitted the adsorption data perfectly withRMG2 = 0.9987 andRCPF2 = 0.9994, and the pseudo-second-order model explained the adsorption kinetics with RMG2 = 0.9644 and RCPF2 = 0.9923. MG and CPF adsorption to the SBA-15-GG-g-PAA/CoFe2O4 mesoporous adsorbent was successful due to hydrogen bonds, exchange interactions, diffusion, and entrapment in the hydrogel network. In addition to the three-dimensional structure, the mesoporous adsorbent has available adsorption sites for reactive molecules. The reusability of the SBA-15-GG-g-PAA/CoFe2O4 was perused and showed that the mesoporous adsorbent can be separated efficiently and retrieved in three sequential cycles without considerable diminution in the adsorption efficiency.
Salehi et al. (Tue,) studied this question.