Influence of Water Saturation on Dynamic Tensile and Compressive Behaviors of Concrete

This paper experimentally investigates the influence of saturation on dynamic behaviors of concrete under both tension and compression stress states. Two grades of concrete were saturated to 0%, 50%, and 100% by oven drying and water soaking procedures. Split Hopkinson pressure bar (SHPB) tests, reaching the highest strain rate of about 170 s−1, were carried out for dynamic compression. Dynamic splitting tensile tests were carried out by an Instron high-speed test machine, achieving the highest strain rate of about 40 s−1. The test results show that concrete specimens with different saturation ratios are all strain rate-sensitive. Under tensile loading, the effect of free on viscosity is only found to affect concrete's behavior when the strain rate is not very high. The strain rate sensitivity increases with water content when the strain rate is lower than about 3 s−1. However, when the strain rate is greater than 3 s−1, strain rate sensitivity of concretes with different saturations become similar. Under compressive loading, free water in pores reduces the rate effect because it increases the hydrostatic pressure inside the specimen and leads to hydraulic fracturing. The microcracks caused by the hydraulic fracturing effect in the specimen result in macroscopic strength degeneration.