The article provides the characteristics of the end cable couplings of the closed switchgear 110 kV at the electric steelmaking workshop of the metallurgical plant. The functions of the continuous technical condition monitoring system are substantiated, including continuous temperature monitoring and on-line registration of partial discharges in the insulation. The first function provides monitoring of the operational load, and the second has the maximum sensitivity for diagnosing defect propagation. A functional diagram of the developed intelligent on-line system for monitoring technical condition with digital signal transmission is provided. The choice of sensors and processor unit is justified. The authors consider the temperature control system of high-voltage equipment "WDM-T", including a wireless sensor and an information receiver. The results of monitoring the thermal regime are provided, the advantages of partial discharge analysis are pointed out. The temperature trends of the end couplings included in the cable line phases are considered. The system is implemented on the closed switchgear 110 kV end couplings, its long-term operation has confirmed the effectiveness of technical condition monitoring. The developed system may be a component of an on-line cyberphysical system for monitoring the condition of high-voltage equipment in the electric steelmaking workshop.
No takes yet. Share an insight, caveat, or question.
Gasiyarov et al. (2024) studied this question.