Answers are grounded in this paper and cite their sources.
Experimental investigation demonstrates enhanced densification and mechanical performance in lithium-doped boron carbide, indicating twin formation drives lattice strengthening.
Lithium (Li)‐doped boron carbide (B 4 C) has generated widespread attention for its potential to enhance mechanical properties. Nevertheless, the influence of the Li solid solution on the microstructure and mechanical properties of B 4 C ceramics remain unclear. In this research, the microstructure of Li‐doped B 4 C was investigated in meticulous detail. Through X‐ray diffraction, X‐ray photoelectron spectroscopy, and Raman spectroscopy analysis, it was confirmed that Li successfully solubilized in B 4 C at 1 500°C under 50 MPa for an 8 min, resulting in lattice expansion. Further insights from electron energy loss spectroscopy revealed the integration of Li into the crystal lattice and alterations in the C–B–C chains. Furthermore, the Li 2 O content significantly affected the densification and microstructure of B 4 C. Relative density increased from 91.2% (B 4 C) to 99.2% (9 wt.% Li 2 O–B 4 C), accompanied by a transition from a few intragranular planar defects to high‐density twins. Mechanical property tests demonstrated that 9 wt.% Li 2 O–B 4 C exhibited optimal comprehensive mechanical performance, with a flexural strength of 533 ± 27 MPa, fracture toughness of 3.71 ± 0.29 MPa∙m 1/2 , hardness of 33.3 ± 0.6 GPa, and a density of just 2.45 g/cm 3 , surpassing that of pure B 4 C.
No takes yet. Share an insight, caveat, or question.
Pan et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: