Answers are grounded in this paper and cite their sources.
Bulk ceramics of lead halide perovskites hold great promise for developing low-cost and high-performance optoelectronic devices. However, the preparation of perovskite bulk ceramics is still a significant challenge. Here, we have demonstrated that size-tunable bulk ceramics of CsPbBr3 can be achieved by employing solid-state sintering at 550 °C in an air furnace as using traditional oxide ceramics sintering for our reference in this work. Compared to one-step sintering, we found that two-step sintering allowed us to obtain dense CsPbBr3 ceramics that showed clearcut grains and grain boundaries. The devices based on the as-sintered CsPbBr3 bulk ceramics exhibited narrow-band photodetection performance under the positively biased condition. The narrow-band photodetectors showed a specific photodetectivity of 1.03 × 1011 Jones at 551 nm along with a small full width at half-maximum of ∼20 nm. Our work paves a feasible road of preparing perovskite bulk ceramics with solid-state sintering, which is critically important for slicing bulk ceramics of lead halide perovskites toward low-cost photodetector arrays and photovoltaic panels.
No takes yet. Share an insight, caveat, or question.
Li et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: