This is the authors' abstract. We don't add key points for this paper.
The potential of using natural Fe-Ti-rich heavy mineral sand, as an abundant, inexpensive, and ecologically acceptable raw material for the processing of pseudobrookite-based ceramics for thermoelectric applications is presented. The as-received raw powder was used in untreated form or after pre-oxidation at 600°C, 700°C, and 800°C for 1h in an air. The starting powders were consolidated into dense compacts via conventional solid-state sintering or spark plasma sintering. The phase composition, ferrous:ferric ratio and microstructural characteristics of the powders and sintered compacts were investigated by XRD, Mössbauer spectroscopy and SEM. The samples with a higher fraction of pseudobrookite exhibit relatively low thermal conductivity ranging between 2 and 3 W m-1 K-1, which is promising for practical thermoelectric applications. The Seebeck coefficient depends on the ferrous:ferric ratio and is rather low, leading to low power factor values for all the samples which will have to be improved for practical applications.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Hanžel et al. (2024) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: