Answers are grounded in this paper and cite their sources.
This paper proposes a novel optimisation approach for laser induced phased-arrays for detection purposes in large area inspection. The optimisation aims to maximise the detection capability of a phased-array while minimising the inspection time. This is done by using a simulation ray-tracing model that evaluates multiple candidate configurations. The metrics that measure the detection performance for a target defect are the receiver operating characteristic curve and the signal-to-noise ratio. The inspection time is indirectly computed through the number of measurement points per unit length in a continuous inspection. This depends on the physical aperture and pitch of the phased-array and they are the quantities optimised. The optimisation and modelling approach are validated in an experimental case study for a side-drilled hole as target defect. Further recommendations about directional defects (e.g. cracks at different angles) are provided.
No takes yet. Share an insight, caveat, or question.
Cantero‐Chinchilla et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: