Design and construction of the Texas Christian University impedance tube

The two-microphone impedance tube test method is a well-established and widely used technique for determining the acoustic absorption coefficient and impedance ratio of materials. This method uses two closely spaced microphones to simultaneously measure the incident and reflected sound waves. A two-microphone impedance tube measurement system made of 6061-T6 Aluminum with a diameter of 3 inches, a 0.5 inch wall thickness, and microphones spaced 2.7 inches apart has been constructed for undergraduate research at Texas Christian University (TCU). These geometrical values suggest a usable frequency range of 50 Hz to 2637.77 Hz as referenced in ASTM Standard E1050-19. Validation of the system was achieved by taking measurements on Owen Corning Type 705 pressed fiberglass board with a 1-inch thickness and comparing them to absorption data provided by the manufacturer. Additional validation measurements were taken without a test sample in place. All validation tests suggest that the TCU impedance tube is an accurate measurement system.