Answers are grounded in this paper and cite their sources.
To control the emission of SO 2 from flue gas into the atmosphere while considering the capture and collection of greenhouse gas CO 2 , the adsorption behavior of a binary mixture of SO 2 and other gases in flue gas (O 2 /N 2 /H 2 O/CO[Formula: see text] in (10, 10) carbon nanotube (CNT) was simulated using grand canonical Monte Carlo (GCMC) simulation. The adsorption and separation performance of SO 2 in CNTs with a diameter range of 0.81–1.63 nm for the five-component mixture gas was also analyzed. The findings suggest that the adsorption and separation of SO 2 are primarily influenced by CO 2 (reduction of adsorption capacity by about 50%, separation coefficient of SO 2 /CO 2 is lowest) with this effect being more pronounced under high pressure. Meanwhile, it was observed that CNTs with larger pipe diameters exhibit higher SO 2 adsorption capacity, but relatively lower SO 2 /CO 2 selectivity and lower stability. On the other hand, CNTs with smaller diameters have relatively lower adsorption capacity for SO 2 , but exhibit good selectivity and stability (under different pressure) for SO 2 /CO 2 . Based on the statistical analysis of SO 2 adsorption capacity and SO 2 /CO 2 selectivity, it was determined that (6, 6) CNT with a diameter of 0.81[Formula: see text]nm can exhibit excellent SO 2 adsorption and separation performance at atmospheric pressure, while appropriate large diameter CNTs should be selected for flue gas treatment under high pressure.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: