CFD-DPM Simulation on the Atmospheric Pollutant Dispersion in Industrial Park

In order to mitigate the impact of particulate pollutants in Nanjing Sample Industrial Park, it is imperative to simulate the wind field and pollutant dispersion inside the park. Therefore, a CFD-DPM study was employed to simulate the wind field and pollutant dispersion with an accurate landform model. A large eddy simulation was utilized for calculating wind flow distribution inside the park, which is more suitable than Reynolds-Averaged Navier–Stokes Equations (RANS). The physical model of the plant canopy was incorporated to assess its influence on the wind field and particulate pollutants through drag, buoyancy, and deposition effects. Using this method, the distributions of the wind field, and contaminant and the sensitivity tests were obtained by means of calculating a number of research cases under different meteorological conditions. In the numerical results, the wind field was obstructed by the plant canopy, resulting in near-ground uniformity under unstable weather conditions. The distribution of particulate pollutants was influenced not only by the drag and buoyancy effects but also by deposition, which caused an accumulation of particulate pollutants on the windward side of the canopy under unstable weather conditions. The sensitivity tests were performed by comparing the concentrations of particulate pollutants under various conditional settings. The canopy regions can remove the particulate pollutant by 50% under stable weather conditions. The deposition effect is enhanced by larger particle density and diameter and is also influenced by leaf area density.