Answers are grounded in this paper and cite their sources.
The article describes basics of production as well as a structure and tribological properties of a compositewith a B101 bronze matrix and glassy carbon acting as a solid lubricant. The composite is intended foruse as a sliding cover of a current collector in a rail transport. It is intended to replace the previously usedcarbon-copper composites, which have insufficient mechanical properties for high-speed rail. The results ofcomparative tribological tests of the matrix and composite material in contact with a traction copper (Cu-ETP)confirmed lower wear of the composite than that of the matrix under friction in air, without current load. Theaddition of 10% of a large-cell glassy carbon foam (90% porosity) reduced the wear of the contact (by 28%and 10%) but did not significantly reduce (by 8.4–5.8%) the friction forces. In the tested contacts abrasive andadhesive wear, caused by the presence of copper, dominated. Self-mated materials tend to develop adhesivebonds. Therefore, the next stage of the research optimising a composite production process, e.g. by using aglassy carbon foam with smaller elementary structure or glassy carbon microparticles will be used.
No takes yet. Share an insight, caveat, or question.
Posmyk et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: