Fast assessment of solar-to-hydrogen efficiency limits and loss analysis in photovoltaic-driven water electrolyzers using polarization curves

Fast assessment of solar-to-hydrogen efficiency limits and loss analysis in photovoltaic-driven water electrolyzers using polarization curvesOleksandr Astakhov a, Uwe Rau a, b, Tsvetelina Merdzhanova aa Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK-5-Photovoltaik), Jülich, Germanyb Jülich Aachen Research Alliance (JARA-Energy) and Faculty of Electrical Engineering and Information Technology, RWTH Aachen University, Schinkelstr. 2, 52062 Aachen, GermanyProceedings of The Future of Hydrogen: Science, Applications and Energy Transition (H2Future)Ibiza, Spain, 2024 April 17th - 19thOrganizers: Carolina Gimbert Suriñach, Sixto Gimenez Julia and Emilio PalomaresOral, Oleksandr Astakhov, presentation 008DOI: https://doi.org/10.29363/nanoge.hfuture.2024.008Publication date: 27th February 2024Efficient conversion of solar energy into molecules such as hydrogen is one of the most important challenges for sustainable energy systems of the future. Photovoltaic (PV) driven electrochemical (EC) water splitting particularly in direct-coupled design offers highest solar-to-hydrogen efficiency. In most practical cases, PV and EC devices are developed separately and then tested in PV-EC combination at a later stage. While state-of-the-art PV devices are represented by a range of standardized commercial modules, the electrolyzers are much less established. Large number of materials, approaches, and designs are constantly tested for water electrolyzers. Enormous efforts of many groups produce increasing number of new catalysts every year. In this situation, it is desirable to predict performance of a specific electrolyzer in combination with PV devices of various technologies and sizes. It is useful to evaluate potential efficiency of a PV-EC system from the electrolyzer point of view without actually building and optimizing an experimental device. To address this issue, we developed method for fast assessment of the maximal solar-to-hydrogen efficiency (STH limit) attainable by the specific electrolyzer via the "reverse analysis" of its polarization curve [1]. We show that despite the complexity of the parameter space, there is a surprisingly simple way to estimate the limit of efficiency in any PV-assisted electrolyzer system. Principle of the reverse analysis is presented in Figure 1. The maximum STH for a specific electrolyzer is achieved when the current-voltage (IV) characteristics of a PV device intersects polarization curve of an EC device at maximum power point (MPP). Conversely, each point on the EC polarization curve can be considered as the MPP of the PV device optimally coupled to the EC device, Figure 1 (a). Therefore, at each point on the polarization curve, the minimum PV efficiency and maximum EC efficiency can be calculated for a specific irradiance, Figure 1 (b). Product of both efficiencies generates the STH limit value attainable at that specific point on the polarization curve, Figure 1 (b). By plotting the STH limit versus PV efficiency, the resulting dependence is achieved, Figure 1 (c). It is the STH limit attained with PV device of any efficiency at the target irradiance and size. The solution is not analytic. It is a shortcut avoiding solving transcendental equations of PV and EC IVs. Therefore, finding STH limit at specific PV efficiency requires numerical interpolation of the dependence in Figure 1 (c). In return this "reverse analysis" is performed with elementary conversion of the EC polarization curve and does not involve any modeling or analysis of PV IV characteristics. It provides quick and simple way to quantify the potential of the electrolyzer as for the STH efficiency limit in combination with any PV device. In our paper we present the principle of the reverse analysis, show how to identify, and quantify losses in experimental PV-EC combinations. We present an extended set of results of reverse analysis applied to a variety of PV-EC combinations described in the literature. We discuss how the method can be used to analyze mutual scaling of PV and EC devices to address design of practical systems in the field. Finally, we show how the analysis can be used to analyze systems with indirect coupling, involving DC-DC converters or other power management electronics between PV and EC parts. References:[1] Astakhov, O.; Smirnov, V.; Rau, U.; Merdzhanova, T. Prediction of Limits of Solar-to-Hydrogen Efficiency from Polarization Curves of the Electrochemical Cells. Sol. RRL 2022, 6: 2100783© FUNDACIO DE LA COMUNITAT VALENCIANA SCITOnanoGe is a prestigious brand of successful science conferences that are developed along the year in different areas of the world since 2009. Our worldwide conferences cover cutting-edge materials topics like perovskite solar cells, photovoltaics, optoelectronics, solar fuel conversion, surface science, catalysis and two-dimensional materials, among many others.MATSUSPreviously nanoGe Spring Meeting (NSM) and nanoGe Fall Meeting (NFM), MATSUS is a multiple symposia conference focused on a broad set of topics of advanced materials preparation, their fundamental properties, and their applications, in fields such as renewable energy, photovoltaics, lighting, semiconductor quantum dots, 2-D materials synthesis, charge carriers dynamics, microscopy and spectroscopy semiconductors fundamentals, etc.International Conference on Hybrid and Organic PhotovoltaicsInternational Conference on Hybrid and Organic Photovoltaics (HOPV) is celebrated yearly in May. The main topics are the development, function and modeling of materials and devices for hybrid and organic solar cells. The field is now dominated by perovskite solar cells but also other hybrid technologies, as organic solar cells, quantum dot solar cells, and dye-sensitized solar cells and their integration into devices for photoelectrochemical solar fuel production.Asia-Pacific International Conference on Perovskite, Organic Photovoltaics and OptoelectronicsThe main topics of the Asia-Pacific International Conference on Perovskite, Organic Photovoltaics and Optoelectronics (IPEROP) are discussed every year in Asia-Pacific for gathering the recent advances in the fields of material preparation, modeling and fabrication of perovskite and hybrid and organic materials. Photovoltaic devices are analyzed from fundamental physics and materials properties to a broad set of applications. The conference also covers the developments of perovskite optoelectronics, including light-emitting diodes, lasers, optical devices, nanophotonics, nonlinear optical properties, colloidal nanostructures, photophysics and light-matter coupling.International Conference on Perovskite Thin Film Photovoltaics Perovskite Photonics and OptoelectronicsThe International Conference on Perovskite Thin Film Photovoltaics Perovskite Photonics and Optoelectronics (NIPHO) is the best place to hear the latest developments in perovskite solar cells as well as on recent advances in the fields of perovskite light-emitting diodes, lasers, optical devices, nanophotonics, nonlinear optical properties, colloidal nanostructures, photophysics and light-matter coupling.