Answers are grounded in this paper and cite their sources.
The objective of this paper is to present the pre job planning, modelling and results of an IOC first deployment of a post cement job hydration accelerating heat sweep. This heat sweep utilizes a pit of pre heated seawater which is circulated into the casing on completion of the conductor primary cement job, to accelerate the early compressive strength development of the cement. This rapid cement hydration technique is enabled through a mechanical stabbed in cementing system that optimizes the placement of the conductor primary cement job and eliminates conventional cement or sub surface release (SSR) plug shoetracks. Preparation for the job involved the service company utilizing a heat transfer software to simulate the heat transfer from the seawater through the casing and into the cement column. This heart transfer modelling was then utilized to create a temperature profile of the incremental temperature increase of the cement and corresponding effect on early compressive strength development. In addition to this, the third party cementing company conducted an ultrasonic cement analyzer (UCA) test to further model the influence the heat sweep would have on the compressive strength development of the cement based on the heat transfer software simulations. The conductor cement job was completed successfully, with the stabbed in inner string cementing system and post cement job heat sweep saving the operator rig time. The conductor cement job was completed in a water depth of 344m, with the 30" conductor shoe set 87m below mudline. Post job data was obtained through a downhole temperature logger located within the stabbed in inner string cementing system. This logger provided memory data from the run in hole (RIH), pre job circulation, pumping of cement job and circulation of a heat sweep with a temperature of 70 degC at surface. The temperature logger recorded a downhole temperature of 61.2 degC 4m from the float shoe. Both the stabbed in inner string cementing system and rapid cement hydration technology have the potential to reduce rig time and mitigate against various operational risks in the global deepwater well construction space.
No takes yet. Share an insight, caveat, or question.
Elder et al. (2024) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: